The continuous pyrolysis plant has a screw feeding sealing system, which is characterized by high heat exchange efficiency and capacity. Its electrical system is also impeccably controlled. It realizes zero emissions and can be fed with any fuel. The hot air flowing into the reactor heats up the fuel. The finished products are clean and odorless. It can also be used to recycle waste materials.
Tyre Shredder
The continuous pyrolysis plant with tyred shredder is a unique and highly-efficient method for processing tyre waste. It is one fully-automated system that directly feeds waste tyres into the furnace, thus ensuring safety and efficiency for the workers. This method also produces biogas that can be used to generate electricity and generate heat for homes.
Screw Automatic Feeder
The continuous tyre-to-oil pyrolysis plant can automatically convert waste tires to fuel oil, carbon black, or steel wires. Its two main components are the tire crusher and the screw automatic feeder. The tire crusher crushes the waste tires to small pieces and pretreats them. The screw automatic feeder transports these pieces to the tyre pyrolysis plant, and this equipment is used for the entire process. The screw automatic feeder is a long and sealed screw conveyor that combines the crushing, pretreatment, and transporting of waste tires.
Horizontal Pyrolysis Reactor
A horizontal pyrolysis reactor is a crucial part of the continuous petrochemical production process. In this process, plastic waste is converted into fuel by pyrolysis. The process requires that the water content of the raw materials is lower than 15 percent. Also, the material must be of a size that does not exceed 20 mm. The process uses a condenser system to cool the gas and to purify it. After it is finished, the residual oil gas goes to a condenser for recycling and disposal.
Condensing System
A condensing system in a continuous pyrolysis plant for sale is used to cool oil gas produced during the pyrolysis process. There are three stages in this process. A vertical condenser settles impurities, allowing a high oil yield. A second step is the oil-water separator, which prevents oil from recirculating and removes carbon black dust. The final step is the condensing tower, which liquefies any residual oil from the exhaust gas and returns it to the combustion system for further processing.
Oil Tank
Continuous pyrolysis plant is a technology which converts waste plastics into fuel oil and carbon black. Fuel oil is used in metallurgical furnaces and marine boilers. There are many types of fuel oil. They are used in various industries including chemical industry, transportation, and light industry. Fuel oil is also used as a heating fuel. Its service life is 68 years. A continuous pyrolysis plant has a tank for oil.
Tail Gas Purification System
A continuous pyrolysis plant consists of several components, including a feeding system, a horizontal pyrolysis reactor, an oil tank, and a combustible gas recovery system. The reactor receives the liquid fuel. RDF is loaded via a conveyor belt (16), which unloads the material into the receiving tank. The raw material is then fed into the reactor through an auger feeder, which is equipped with a gate system. The system also includes a pressure and temperature monitoring system, as well as a PLC electric control system. Check the rubber pyrolysis plant here.